The Aisin AS69RC transmission was introduced in 2013 Ram 3500, 4500, and 5500 trucks paired with the 6.7L Cummins. Designed for commercial-grade towing, the AS69RC is stronger than the 68RFE, but it still develops issues with harsh shifting, torque converter failures, and overheating when pushed beyond its limits.
At DK Auto & Diesel Service in Magnolia, TX, we service, repair, and upgrade the AS69RC to meet the demands of towing, hotshot trucking, and tuned Cummins builds.
Common Ram Aisin AS69RC Transmission Problems & Symptoms
1. Harsh or Erratic Shifting
• Symptoms:
◦ Rough 1–2 or 2–3 upshifts
◦ Hard downshifts when slowing down
◦ Delay engaging drive or reverse
• Causes:
◦ TCM calibration issues
◦ Valve body wear or sticking solenoids
◦ Adaptive learning quirks
• Fixes:
◦ TCM reprogramming or custom tuning
◦ Valve body rebuild/upgrade with Sonnax kits
◦ Adaptive relearn reset
2. Torque Converter Problems
• Symptoms:
◦ Shudder during steady cruise (40–60 mph)
◦ RPM surge when towing or climbing hills
◦ Poor lockup engagement
• Causes:
◦ Stock converter clutch wear under Cummins torque
◦ Heat-related damage from commercial hauling
• Fixes:
◦ Replace with billet multi-disc converter
◦ ECM/TCM tuning to optimize lockup strategy
◦ Cooler line flush and fluid service
3. Overheating Under Heavy Tow/Haul
• Symptoms:
◦ Transmission over-temp warning
◦ Burnt-smelling fluid
◦ Loss of pulling power in limp mode
• Causes:
◦ Extended towing beyond stock cooling capacity
◦ Converter slip creating excess heat
• Fixes:
◦ Install auxiliary transmission cooler
◦ Shorten service intervals for heavy-duty use
◦ Tuning to raise line pressure and reduce slip
4. Valve Body & Solenoid Issues
• Symptoms:
◦ Slipping between gears
◦ Harsh/erratic shift patterns
◦ Codes for pressure control solenoids
• Causes:
◦ Wear in valve body bores
◦ Weak solenoids under high-mileage use
• Fixes:
◦ Rebuild valve body with heavy-duty separator plates
◦ Replace solenoid pack
◦ Pressure calibration tuning
5. Input Shaft & Hard-Part Failures (Tuned Trucks)
• Symptoms:
◦ Sudden loss of drive under load
◦ Loud bang/clunk, truck won’t move
◦ Metal debris in pan
• Causes:
◦ Stock input/output shafts overstressed with tuned Cummins
◦ High torque stress from hotshot towing
• Fixes:
◦ Upgrade to billet shafts & drums
◦ Full rebuild with heavy-duty steels and clutch packs
How DK Auto & Diesel Fixes the Aisin AS69RC
We build AS69RCs stronger than stock for commercial, towing, and tuned applications:
- Billet torque converter upgrades
- Heavy-duty clutch packs & steels
- Valve body rebuilds with Sonnax/TransGo solutions
- TCM/ECM tuning for better shift logic and reduced slip
- Auxiliary cooler installs for hot Texas towing
- 24-month / 24,000 mile warranty
Schedule Your Ram Aisin AS69RC Transmission Diagnostic in Magnolia, TX
If your AS69RC is slipping, shuddering, or overheating, don’t risk a roadside breakdown. Bring it to DK Auto & Diesel Service for diagnostics and upgrade options.
Serving Magnolia, Montgomery, Conroe, The Woodlands, Tomball, Willis, and Spring.
Book a Transmission Diagnostic Today
FAQ About Ram Aisin AS69RC Transmissions
Is the AS69RC better than the 68RFE?
- Yes — it’s stronger and better suited for heavy towing. But it still suffers from converter, valve body, and tuning-related issues.
How much power can the AS69RC handle?
- Stock, it’s safe around 400–450 hp. Built versions with billet parts can hold 700+ hp reliably.
How often should I service the AS69RC?
- Every 50k miles for light duty, or every 20k–30k miles under commercial/hotshot use. Always use Mopar-approved ATF+4 fluid.










