The Ford 5R110W TorqShift transmission was used in 2003–2010 Super Duty trucks with the 6.0L and 6.4L Powerstroke diesel. Marketed as a 5-speed, it actually operates more like a 6-speed with a computer-controlled shifting strategy.
While the 5R110 is known as one of Ford’s more durable heavy-duty transmissions, it still develops shudder, solenoid problems, and limp mode issues over time.
At DK Auto & Diesel Service in Magnolia, TX, we provide complete diagnostics, rebuilds, and upgrades for the 5R110W.
Common Ford 5R110 Transmission Problems & Symptoms
1. Torque Converter Failure
• Symptoms:
◦ Shudder at highway speeds
◦ RPM flare when towing or climbing hills
◦ Loss of lockup function
• Causes:
◦ Converter clutch wear (common in tuned/towed trucks)
◦ Overheating during heavy loads
• Fixes:
◦ Upgrade to a billet multi-disc torque converter
◦ TCM calibration to optimize lockup strategy
◦ Cooler upgrades for towing applications
2. Solenoid Pack & Valve Body Issues
• Symptoms:
◦ Harsh or erratic shifts
◦ Delay into drive or reverse
◦ Stuck in limp mode
• Causes:
◦ Failed solenoid pack (integrated unit on 5R110)
◦ Valve body gasket leaks or bore wear
• Fixes:
◦ Replace solenoid pack with new/upgraded unit
◦ Rebuild/upgrade valve body with Sonnax kits
◦ Perform adaptive relearn after repair
3. Overheating Under Load
• Symptoms:
◦ Transmission temperature light or limp mode
◦ Fluid darkening or burnt smell
◦ Loss of pulling power on long grades
• Causes:
◦ Towing heavy loads without sufficient cooling
◦ Stock calibration allowing converter slip
• Fixes:
◦ Auxiliary transmission cooler install
◦ Synthetic fluid service
◦ TCM tuning to reduce slip under load
4. Input Shaft & Hard-Part Failures
• Symptoms:
◦ Loss of drive in certain gears
◦ Metallic debris in fluid
◦ Sudden failure under heavy throttle/tow
• Causes:
◦ Stock input shaft twisting/snapping with high power
◦ Clutch drum wear in high-mileage units
• Fixes:
◦ Hardened input shaft installation (performance/towing builds)
◦ Full rebuild with upgraded drums and steels
5. Electronic / TCM Faults
• Symptoms:
◦ “Transmission Fault” or limp mode
◦ Codes like P2703, P2704, or solenoid performance errors
◦ Erratic shift scheduling
• Causes:
◦ TCM software corruption
◦ Faulty wiring or sensors
• Fixes:
◦ Updated programming or TCM replacement
◦ Harness/sensor repair
◦ Full scan and adaptive relearn
How DK Auto & Diesel Fixes the 5R110 TorqShift
We strengthen the 5R110W beyond stock for tow, work, and performance:
- Billet torque converter upgrades
- Heavy-duty clutch packs & steels
- Solenoid pack replacement & valve body rebuilds
- Hardened input shafts for tuned trucks
- Auxiliary cooling installs for Texas towing
- 24-month / 24,000 mile warranty
Schedule Your 5R110 Transmission Diagnostic in Magnolia, TX
If your 5R110 TorqShift is slipping, shuddering, or overheating, bring it to DK Auto & Diesel Service for a complete diagnostic and upgrade plan.
Serving Magnolia, Montgomery, Conroe, The Woodlands, Tomball, Willis, and Spring.
Book a Transmission Diagnostic Today
FAQ About Ford 5R110 Transmissions
Is the 5R110 better than the older 4R100?
- Yes, it’s stronger, shifts smoother, and handles more torque — but it’s still vulnerable without upgrades, especially in tuned diesel trucks.
Can a 5R110 be built for high horsepower?
- Absolutely. With billet shafts, upgraded converters, and stronger clutch packs, these units can handle 700+ hp reliably.
How often should I service the 5R110?
- We recommend fluid and filter changes every 30k–40k miles, or sooner with heavy towing.










