The Ford 6.4L Power Stroke was offered in the F-250, F-350, and F-450 Super Duty trucks from 2008–2010. Built by Navistar, it was designed with high-pressure common-rail injection, piezo injectors, dual sequential turbochargers, and a Diesel Particulate Filter (DPF) to meet stricter EPA emissions standards.
On paper, the 6.4 was an improvement over the 6.0, but in practice, it became infamous for fuel dilution, DPF clogging, cracked pistons, and cooling system failures.
At DK Auto & Diesel Service in Magnolia, TX, we specialize in diagnosing, repairing, and upgrading the 6.4 Power Stroke for better reliability, towing power, and performance.
Common 6.4 Power Stroke Problems & Symptoms
1. Fuel Dilution (Diesel in the Oil)
• Symptoms:
◦ Rising oil level on dipstick
◦ Frequent regens / poor fuel economy
◦ Premature bearing or piston wear
• Causes:
◦ Regeneration strategy dumps fuel during exhaust stroke → washes down cylinder walls
• Fixes:
◦ More frequent oil changes (every 3–5k miles)
◦ Updated tuning to reduce post-injection fuel wash
◦ Catch issues early with oil analysis
2. DPF (Diesel Particulate Filter) Problems
• Symptoms:
◦ Excessive regens
◦ Loss of power / limp mode
◦ “Check Engine” or “Service Exhaust” messages
• Causes:
◦ Soot overload from frequent short trips
◦ Failed sensors preventing regen
• Fixes:
◦ Forced regen service
◦ DPF cleaning or replacement
◦ Check EGR & sensors tied to regen cycle
3. Cracked Pistons
• Symptoms:
◦ Sudden misfire
◦ White/blue smoke from exhaust
◦ Loss of compression
• Causes:
◦ Weak piston design → cracking around fuel bowl under high stress or tuning
• Fixes:
◦ Engine rebuild with forged pistons for tuned/power builds
◦ Proper tuning for longevity
4. Cooling System Failures
• Symptoms:
◦ Overheating while towing
◦ Coolant puking from degas bottle
◦ Oil/coolant cross-contamination
• Causes:
◦ Oil cooler plugging from casting sand/debris
◦ Radiator and EGR cooler failures
• Fixes:
◦ Install updated oil cooler
◦ Upgrade to stronger aftermarket radiator
◦ Replace EGR cooler with updated design
5. Turbocharger Failures
• Symptoms:
◦ Loss of boost
◦ Excess smoke
◦ Turbo vane codes / surging
• Causes:
◦ Dual turbo setup prone to soot buildup and bearing wear
• Fixes:
◦ Clean or rebuild turbos
◦ Upgrade to aftermarket turbo kit for performance and reliability
How DK Auto & Diesel Fixes the 6.4 Power Stroke
We eliminate the 6.4’s weaknesses and make it reliable:
- Frequent oil service & fuel dilution checks
- DPF cleaning/replacement and regen troubleshooting
- Forged piston rebuilds for performance builds
- Oil cooler, radiator, and EGR upgrades
- Turbo cleaning, rebuild, or upgrade kits
- Custom ECM/TCM tuning for towing & efficiency
Schedule Your 6.4L Power Stroke Diagnostic in Magnolia, TX
If your 6.4 Power Stroke is suffering from fuel dilution, overheating, or DPF problems, trust DK Auto & Diesel Service to restore reliability and power.
Serving Magnolia, Montgomery, Conroe, The Woodlands, Tomball, Willis, and Spring.
Book a Power Stroke Diagnostic Today
FAQ About the 6.4 Power Stroke
Is the 6.4 worse than the 6.0 Power Stroke?
- It depends. The 6.4 fixed some 6.0 issues, but introduced new ones like fuel dilution and piston cracking. Proper maintenance and updates make it reliable.
How long will a 6.4 Power Stroke last?
- With proper maintenance, many reach 200k–300k miles. Neglected engines often fail much sooner.
What’s the best way to make a 6.4 reliable?
- Stay ahead of maintenance (oil changes, cooling system service), address DPF issues quickly, and rebuild with forged pistons if adding power.










